Nitrogen and harvest effects on soil properties under rainfed switchgrass and no‐till corn over 9 years: implications for soil quality

Nitrogen fertilizer and harvest management will alter soils under bioenergy crop production and the long‐term effects of harvest timing and residue removal remain relatively unknown. Compared to no‐tilled corn (NT‐C, Zea mays L.), switchgrass (Panicum virgatum L.) is predicted to improve soil properties [i.e. soil organic C (SOC), soil microbial biomass (SMB‐C), and soil aggregation] due to its perennial nature and deep‐rooted growth form, but few explicit field comparisons exist. We assessed soil properties over 9 years for a rainfed study of N fertilizer rate (0, 60, 120, and 180 kg N ha^?1) and harvest management on switchgrass (harvested in August and postfrost) and NT‐C (with and without 50% stover removal) in eastern NE. We measured SOC, aggregate stability, SMB‐C, bulk density (BD), pH, P and K in the top 0–30 cm. Both NT‐C and switchgrass increased SMB‐C, SOC content, and aggregate stability over the 9 years, reflecting improvement from previous conventional management. However, the soils under switchgrass had double the percent aggregate stability, 1.3 times more microbial biomass, and a 5–8% decrease in bulk density in the 0–5 and 5–10 cm depths compared to NT‐C. After 9 years, cumulative decrease in available P was significantly greater beneath NT‐C (?24.0 kg P ha^?1) compared to switchgrass (?5.4 kg P ha^?1). When all measured soil parameters were included in the Soil Management Assessment Framework (SMAF), switchgrass improved soil quality index over time (ΔSQI) in all depths. NT‐C without residue removal did not affect ΔSQI, but 50% residue removal decreased ΔSQI (0–30 cm) due to reduced aggregate stability and SMB‐C. Even with best‐management practices such as NT, corn stover removal will have to be carefully managed to prevent soil degradation. Long‐term N and harvest management studies that include biological, chemical, and physical soil measurements are necessary to accurately assess bioenergy impacts on soils.     

Sustainable limits to crop residue harvest for bioenergy: maintaining soil carbon in Australia's agricultural lands

The use of crop residues for bioenergy production needs to be carefully assessed because of the potential negative impact on the level of soil organic carbon (SOC) stocks. The impact varies with environmental conditions and crop management practices and needs to be considered when harvesting the residue for bioenergy productions. Here, we defined the sustainable harvest limits as the maximum rates that do not diminish SOC and quantified sustainable harvest limits for wheat residue across Australia's agricultural lands. We divided the study area into 9432 climate‐soil (CS) units and simulated the dynamics of SOC in a continuous wheat cropping system over 122 years (1889 – 2010) using the Agricultural Production Systems sIMulator (APSIM). We simulated management practices including six fertilization rates (0, 25, 50, 75, 100, and 200 kg N ha^?1) and five residue harvest rates (0, 25, 50, 75, and 100%). We mapped the sustainable limits for each fertilization rate and assessed the effects of fertilization and three key environmental variables – initial SOC, temperature, and precipitation – on sustainable residue harvest rates. We found that, with up to 75 kg N ha^?1 fertilization, up to 75% and 50% of crop residue could be sustainably harvested in south‐western and south‐eastern Australia, respectively. Higher fertilization rates achieved little further increase in sustainable residue harvest rates. Sustainable residue harvest rates were principally determined by climate and soil conditions, especially the initial SOC content and temperature. We conclude that environmental conditions and management practices should be considered to guide the harvest of crop residue for bioenergy production and thereby reduce greenhouse gas emissions during the life cycle of bioenergy production.     

Colony size and not nest density drives reproductive output in the Common Tern Sterna hirundo

Density is known to be an important factor in population size regulation. Several mechanisms of density limitation have been identified in colonial birds. We studied competition in Common Terns Sterna hirundo to assess whether the factor limiting reproductive output was competition for nest‐sites, which is dependent on local nest density, or density‐dependent competition for food resources, which is dependent on overall colony size using the same foraging area. We found strong associations of both colony size and nest density with reproductive output in five colonies of Common Terns in three different habitats (one marine, two freshwater). Based on detailed long‐term datasets of six separate sub‐colonies of the Banter See colony that differed in nest density, we found that reproductive success was not related to nest density but to overall colony size, possibly a result of resource depletion and food competition. We also found carry‐over effects of colony size during rearing on post‐fledging return rate. These results have important implications for the conservation management plans aimed at recovering declining populations of Common Terns.     

Differential roles of Sirt1 in HIF-1α and HIF-2α mediated hypoxic responses

Hypoxia-inducible factors 1α and 2α (HIF-1α and HIF-2α) determine cancer cell fate under hypoxia. Despite the similarities of their structures, HIF-1α and HIF-2α have distinct roles in cancer growth under hypoxia, that is, HIF-1α induces growth arrest whereas HIF-2α promotes cell growth. Recently, sirtuin 1 (Sirt1) was reported to fine-tune cellular responses to hypoxia by deacetylating HIF-1α and HIF-2α. Yet, the roles of Sirt1 in HIF-1α and HIF-2α functions have been controversial. We here investigated the precise roles of Sirt1 in HIF-1α and HIF-2α regulations. Immunological analyses revealed that HIF-1α K674 and HIF-2α K741 are acetylated by PCAF and CBP, respectively, but are deacetylated commonly by Sirt1. In the Gal4 reporter systems, Sirt1 was found to repress HIF-1α activity constantly in ten cancer cell-lines but to regulate HIF-2α activity cell type-dependently. Moreover, Sirt1 determined cell growth under hypoxia depending on HIF-1α and HIF-2α. Under hypoxia, Sirt1 promoted cell proliferation of HepG2, in which Sirt1 differentially regulates HIF-1α and HIF-2α. In contrast, such an effect of Sirt1 was not shown in HCT116, in which Sirt1 inactivates both HIF-1α and HIF-2α because conflicting actions of HIF-1α and HIF-2α on cell growth may be offset. Our results provide a better understanding of the roles of Sirt1 in HIF-mediated hypoxic responses and also a basic concept for developing anticancer strategy targeting Sirt1.     

Identification of the reactive cysteine residues in yeast dipeptidyl peptidase III

Dipeptidyl peptidases III (DPPs III) form a distinct metallopeptidase family characterized by the unique HEXXGH motif. High susceptibility to inactivation by organomercurials suggests the presence of a reactive cysteine residue(s) in, or close to, their active site. Yeast DPP III contains five Cys, none of which is absolutely conserved within the family. In order to identify reactive residue(s), site-directed mutagenesis on yeast His₆-tagged DPP III was employed to substitute specifically all five cysteine residues to serine. The variant enzymes thus obtained were enzymatically active and showed an overall structure not greatly affected by the mutations as judged by circular dichroism. Analysis by native and SDS-PAGE under non-reducing conditions revealed the existence of a monomeric and dimeric form in all DPP III proteins except in the C130S, implying that dimerization of yeast DPP III is mediated by the surface-exposed cysteine 130.     

Predicted residue–residue contacts can help the scoring of 3D models

During the 7th Critical Assessment of Protein Structure Prediction (CASP7) experiment, it was suggested that the real value of predicted residue–residue contacts might lie in the scoring of 3D model structures. Here, we have carried out a detailed reassessment of the contact predictions made during the recent CASP8 experiment to determine whether predicted contacts might aid in the selection of close‐to‐native structures or be a useful tool for scoring 3D structural models. We used the contacts predicted by the CASP8 residue–residue contact prediction groups to select models for each target domain submitted to the experiment. We found that the information contained in the predicted residue–residue contacts would probably have helped in the selection of 3D models in the free modeling regime and over the harder comparative modeling targets. Indeed, in many cases, the models selected using just the predicted contacts had better GDT‐TS scores than all but the best 3D prediction groups. Despite the well‐known low accuracy of residue–residue contact predictions, it is clear that the predictive power of contacts can be useful in 3D model prediction strategies. Proteins 2010. © 2010 Wiley‐Liss, Inc.     

Structural flexibility and the positive charges are the key factors in bacterial cell selectivity and membrane penetration of peptoid-substituted analog of Piscidin 1

Piscidin 1 (Pis-1) is a novel cytotoxic peptide with a cationic α-helical structure isolated from the mast cells of hybrid striped bass. In our previous study, we showed that Pis-1[PG] with a substitution of Pro⁸ for Gly⁸ in Pis-1 had higher bacterial cell selectivity than Pis-1. We designed peptoid residue-substituted peptide, Pis-1[NkG], in which Gly⁸ of Pis-1 was replaced with Nlys (Lys peptoid residue). Pis-1[NkG] had higher antibacterial activity and lower cytotoxicity against mammalian cells than Pis-1 and Pis-1[PG]. We determined the tertiary structure of Pis-1[PG] and Pis-1[NkG] in the presence of DPC micelles by NMR spectroscopy. Both peptides had a three-turn helix in the C-terminal region and a bent structure in the center. Pis-1[PG] has a rigid bent structure at Pro⁸ whereas Pis-1[NkG] existed as a dynamic equilibrium of two conformers with a flexible hinge structure at Nlys⁸. Depolarization of the membrane potential of Staphylococcus aureus and confocal laser-scanning microscopy study revealed that Pis-1[NkG] effectively penetrated the bacterial cell membrane and accumulated in the cytoplasm, whereas Pis-1[PG] did not penetrate the membrane but remained outside or on the cell surface. Introduction of a lysine peptoid at position 8 of Pis-1 provided conformational flexibility and increased the positive charge at the hinge region; both factors facilitated penetration of the bacterial cell membrane and conferred bacterial cell selectivity on Pis-1[NkG].     

Photoconsumption of molecular oxygen on both donor and acceptor sides of photosystem II in Mn-depleted subchloroplast membrane fragments

Oxygen consumption in Mn-depleted photosystem II (PSII) preparations under continuous and pulsed illumination is investigated. It is shown that removal of manganese from the water-oxidizing complex (WOC) by high pH treatment leads to a 6-fold increase in the rate of O₂ photoconsumption. The use of exogenous electron acceptors and donors to PSII shows that in Mn-depleted PSII preparations along with the well-known effect of O₂ photoreduction on the acceptor side of PSII, there is light-induced O₂ consumption on the donor side of PSII (nearly 30% and 70%, respectively). It is suggested that the light-induced O₂ uptake on the donor side of PSII is related to interaction of O₂ with radicals produced by photooxidation of organic molecules. The study of flash-induced O₂ uptake finds that removal of Mn from the WOC leads to O₂ photoconsumption with maximum in the first flash, and its yield is comparable with the yield of O₂ evolution on the third flash measured in the PSII samples before Mn removal. The flash-induced O₂ uptake is drastically (by a factor of 1.8) activated by catalytic concentration (5-10 μM, corresponding to 2-4 Mn per RC) of Mn²⁺, while at higher concentrations (> 100 μM) Mn²⁺ inhibits the O₂ photoconsumption (like other electron donors: ferrocyanide and diphenylcarbazide). Inhibitory pre-illumination of the Mn-depleted PSII preparations (resulting in the loss of electron donation from Mn²⁺) leads to both suppression of flash-induced O₂ uptake and disappearance of the Mn-induced activation of the O₂ photoconsumption. We assume that the light-induced O₂ uptake in Mn-depleted PSII preparations may reflect not only the negative processes leading to photoinhibition but also possible participation of O₂ or its reactive forms in the formation of the inorganic core of the WOC.     

Cryptochrome 3 from Arabidopsis thaliana: structural and functional analysis of its complex with a folate light antenna

Cryptochromes are almost ubiquitous blue-light receptors and act in several species as central components of the circadian clock. Despite being evolutionary and structurally related with DNA photolyases, a class of light-driven DNA-repair enzymes, and having similar cofactor compositions, cryptochromes lack DNA-repair activity. Cryptochrome 3 from the plant Arabidopsis thaliana belongs to the DASH-type subfamily. Its crystal structure determined at 1.9 Angstroms resolution shows cryptochrome 3 in a dimeric state with the antenna cofactor 5,10-methenyltetrahydrofolate (MTHF) bound in a distance of 15.2 Angstroms to the U-shaped FAD chromophore. Spectroscopic studies on a mutant where a residue crucial for MTHF-binding, E149, was replaced by site-directed mutagenesis demonstrate that MTHF acts in cryptochrome 3 as a functional antenna for the photoreduction of FAD.